Technical Troubleshooting Guides

Step-by-step walkthroughs and command-line fixes for common hardware, OS, and network issues.

1. Fixing No-Display & Failed POST Boots

If your PC lights up but fans spin with no video output after installing new hardware or tuning settings:

  1. Disconnect the AC power cord from the back of the PSU.
  2. Remove the graphics card or access the lower motherboard section to locate the CR2032 coin battery.
  3. Pop the battery out for 5 minutes (or bridge the `CLR_CMOS` jumper pins) to reset system BIOS to default factory specs.
  4. Re-seat memory modules firmly into motherboard DIMM slots until both clips click.

2. Resolving IP Drops & DNS Resolution Errors

When pages fail to load or local network discovery drops, execute a network socket reset using Command Prompt: 

ipconfig /flushdns
netsh winsock reset
netsh int ip reset

Note: Run Command Prompt or Windows Terminal as Administrator before executing these commands, then restart your PC.

3. Initializing & Partitioning New SSDs/HDDs

If a newly connected drive does not display in File Explorer:

  1. Press Win + R, type diskmgmt.msc, and hit Enter to open Disk Management.
  2. If prompted, initialize the target drive using GPT (GUID Partition Table).
  3. Right-click the box labeled Unallocated Space and select New Simple Volume.
  4. Format the partition as NTFS (for Windows environments) or exFAT (for cross-platform access) and assign a drive letter.

4. Scanning & Repairing Corrupted OS Files

To repair system crashes or corrupted core Windows system binaries: 

sfc /scannow
DISM /Online /Cleanup-Image /RestoreHealth